Rayco Fixture Package - Clamping/Vacuum

Option 1 12" x 12" x 1/2" Plate with 1/4-20 holes 1/2" on center and components Total $3390 Option 2 15" x 15" x 1/2" Plate with 1/4-20 holes 1/2" on center and components Total $4040 Option 3 18" x 18" x 1/2" Plate with 1/4-20 holes 1/2" on center and components Total $4360 Option 4 24" x 24" x 3/4" Plate with 1/4-20 holes 1/2" on center and components Total $5070 Option 5 24" x 32" x 3/4" Plate with 1/4-20 holes 1/2" on center and components Total $5500 Option 6 30" x 30" x 3/4" Plate with 1/4-20 holes 1/2" on center and components Total $5720 Option 7 28" x 40" x 3/4" Plate with 1/4-20 holes 1/2" on center and components Total $6280

Fixture Plates are Available in Custom Sizes up to 36" x 56", with either 1/2" or 3/4" Thickness, in Aluminum or Steel, and with 1/4-20 or 3/8-16 Threaded Holes 1/2" or 1" on Center. 1/2" hole spacing is recommended if you have a large variety of parts, or the parts have a complex geometry. Special plate sizes and component changes quoted upon request. Please Call!

Important! Please Note:

Up to four (4) mounting holes will be drilled at no extra charge. We require a customer supplied drawing showing the location and size of the holes to be drilled. Customer assumes responsibility for the CMM mounting hole size and location information being accurate, and ensuring this information is provided as soon as a PO is issued.